- Model NO.: EDTA Cu
- Release Type: Quick
- Chemical Character: Chemical Neutral
- Type: Chelated
- Molecular Formular: C10h12n2o8cuna2
- Cu Chelated: 14.5%Min
- pH (1% Solution): 6.0-7.0
- Transport Package: 25kgs Kraft Paper Bag
- Origin: China
- Classification: Trace Element Fertilizer
- Infection on Soil: Physiological Neutral
- Appearance: Powder
- Chemical Name: Ethylenediaminetetraacetic Acid, Copper Disodium C
- Molecular Weight: 397.7
- Insoluble Matters in Water: 0.1%Max
- Trademark: TOPUSING
- Specification: SGS
- HS Code: 2921219000
Chemical Name: Ethylene Diamine Tetraacetie Acid-Copper15%
Other names: EDTA-Cu Salt, EDTA-CuNa2
Molecular Formula: C10H12N2O8CuNa2. 2H2O
Molecular Weight: 433.7
CAS No. : 14025-15-1
Light green or blue powder;
Stable water-soluble metal chelated complex;
Solubility is about 1200g/L (20ºC), about 1700g/L (80ºC);
Density is 870kg/m3;
Boiling point is 614.2°C at 760mmHg, flash point is 325.2°C.
A highly stable, top quality, chelated copper fertilizer for safe, efficient and convenient prevention and correction of copper deficiency. It can be supplied as free-flowing, dustless and soluble microgranules.
|Appearance||Light green or blue powder|
|pH (1% aqueous solution)||6-7|
|Loss on drying||1 %max|
|As( ppm)||1 max|
|Heavy metals (as per Pb)( ppm)||4 max|
- Compatible with many crop protection materials enabling economic tank mixing for simultaneous application.
- Also compatible with soluble phosphates, thereby remaining effective in hydroponics and liquid feed systems.
- Excellent environmental and regulatory credentials.
EDTA-Cu15 should be dissolved in a convenient volume of water to suit the application equipment and to ensure even ground coverage.
For general crops, apply as a coarse low pressure spray immediately before the last cultivation prior to sowing or planting. Where crops are established, apply between the rows. Applications should be incorporated into the top few centimeters of soil as soon as possible after application.
For perennial crops, apply as a coarse low pressure spray in a wide circular band under the limit of the full branch spread. For best results, nutrients need to be in the root zone before seasonal growth begins and this can be achieved by appropriate application timing.
Application rates *
Farm crops 0.5 - 2.0 kg per ha
Trees 7 - 30 grams per tree
Shrubs 0.1 - 0.7 kg per 100 bushes
Soft fruit 0.1 - 0.3 kg per 100 plants
*Depending size, degree of deficiency etc
Application rates, general
EDTA-Cu15 may be applied in one application of 1.0 kilograms per hectare but optimum results can be expected if repeat applications are used. In general, foliar applications should be started early in the season as soon as there is sufficient leaf area to absorb the spray.
Application rates, specific
|Winter Cereals||0.25 - 0.50||Apply when spring re-growth commences. For severe deficiency, an additional full rate application soon after tillering (ZCK 23).|
|Spring Cereals||0.25 - 0.50||Apply as soon as there is sufficient leaf area to absorb the spray.|
|Sugar Beet||0.25 -0.5||With repeat dose herbicide programmes, apply with each application.|
Conventional application as soon as there is sufficient leaf area to absorb the spray.
|Peas||0.25||Apply just before or at flowering and repeat if necessary 10-14 days later.|
|Top and Soft Fruit||0.25||Begin application in early spring and repeat as necessary throughout the season.|
|Pasture||0.25 0.5||Apply in early spring, the treatment should be repeated annually.|
Statutory Caution: To be used only where there is a recognized need. Do not exceed the appropriate dose rate.
No health hazard is involved when EDTA-Cu15 is used as directed
No special precautions are necessary for transport by air, sea, rail or road.
Packing: 25kg kraft paper bag
EDTA-Cu15 will store for a minimum of two years under the correct conditions. For user convenience, it is recommended that the product is stored in a dry place. Re-seal partly used packs tightly.
Why Cooperate With Xiamen Topusing
>> Demand--Custom demand are welcomed, we can customize your brands.
>> MOQ --25 ton, the least minimum to support you.
>> Production--Assembly line production, high standard and strict requirements
>> Quality--Humic acid Sources are extracted from young active leonardite mine
>> Package--Tailor-made package to cater for your personalize taste
>> Payment--Various options to make payment more convenient
>> Delivery & Logistics--Within 20 working days after receipt of payment or L/C
>> Customer Service--E-mail your suggestions or complaints, we will handle them ASAP.
Xiamen Topusing Chemical Co., Ltd.
Tel: 0086-592-5534490,2350210 Fax: 0086-592-5538092